Product Name : 10/12/16 Inch Longworth Style Woodturning Lathe Chucks
Description
  • Phenolic Plate for easy chuck rotation.
  • Gripper Buttons self center as chuck is rotated.
  • Grips Project - Once secure, your project is ready to be finished.
The Longworth Style Woodturning Lathe Chuck has a unique self centering mechanism that automatically adjust to the size of your project and is easy to secure. A 2-1/4" chuck adaptor is mounted to the back of the Longworth Style Chuck which mounts to a lathe usinga 4 jaw standard chuck (#2 or 50mm). This allows you to mount and remove the Longworth Style Chuck quickly and easily.Your project is secured by rubber gripping buttons that provide pliable firm gripping power when tightened. The chuck is made from 1/4" phenolic plates that give you years of service and performance.
Unique Self Centering Mechanism.
The Longworth Style Chuck grips your project by simply rotating the phenolic plates. This moves the gripper buttons in or out to the exact position you need. The chuck can grip your project from the outside (outside compression mode) or the inside (inside expansion mode). Once the gripper buttons are firmly up against your project, secure them by tightening the wing nuts.
(LSC5) 8 each Replacement Gripper Buttons with Hardware
(LSC6) 8 each Replacement Gripper Buttons Only
(LSC11) 10" Chuck x 1
(LSC12) 12" Chuck x 1
(LSC14) 16" Chuck x 1
Item NO.Chuck SizeOutside Compression Mode-MinimumOutside Compression Mode-MaximumInside Expansion Mode-MinimumInside Expansion Mode-Maximum
(LSC11) 10" 4-1/2" 8" 5-3/4" 9-1/2"
(LSC12) 12" 4-1/2" 10" 5-3/4" 11-1/2"
(LSC14) 16" 4-1/2" 14" 5-3/4" 15-1/2"

Share To Facebook Share To Twitter Share on linkedin

Copyright © 2020 FORTUNE EXTENDABLES CORP. All rights reserved.
I agree